SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Non-Tech : Any info about Iomega (IOM)?

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Ken Pomaranski who wrote (2787)6/12/1996 1:15:00 AM
From: John Nordstrom   of 58324
 
RE: recordable CD ROM is WRITE ONCE!!

Ken,

There is the PD technology from 3M. This is their drive that is
CD-compatible (it reads CDROMs and read/writes PD 650 disk). The
PD 650 (which hold up to 650 MB) is rewritable media.

Compaq is using these drives some of their DeskPro models (I have
one at work). It seems that Compaq is really betting heavily on
optical hybrid drives that are backward compatible to existing
technologies (the CDROM in the case of the CD-PD drive and the 1.44
MB floppy in case of the LS-120). They are also tightly allied with
3M with both of these drives. The LS-120 seems to be aimed at the
same market as the Zip; the CD-PD possibly at the Jaz (higher
capacity and in upper end machines).

The CD-PD claims to have an average data transfer rate of 875 KB
per second in PD mode; I haven't had opportunity to use it yet.
I have a "special offer" to buy 3 disk for $150.

The pros/cons of the LS-120 have been debated in this forum quite a
bit, but I haven't seen much on the CD-PD.

Two questions. First, does anyone have any feeling if the PD-CD has
the same strengths and weaknesses as the LS-120? Secondly, does
Compaq's close association with 3M not bode well for Iomega OEM
agreements with Compaq?
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext