Craig, It seems to work fine in a series of AllGroups.
It's when the Input commands are different that it picks up the last Input.
The way I checked it was to go back to my 8to10 NPL Scan and change each line in the Printin Statement to a count.
The 1st Printin Line was 1 then 2 ..... etc.
And I recd this as an output. You may have Different results if you run the 8to10 scan because of the Fast list I run it on.
AGU ,8 NPL , 12.062, 11.30, 11,
CPDN ,1 NPL , 9.562, 18.11, 9,
ERGB ,4 NPL , 5.500, 9.79, 12,
FACO ,1 NPL , 13.188, 18.24, 9,
IMCC ,7 NPL , 7.500, 12.10, 5,
ISTN ,5 NPL , 8.375, 9.25, 16,
PRCM ,1 NPL , 11.812, 14.96, 15,
TSA ,8 NPL , 10.875, 16.20, 11,
UAG ,1 NPL , 11.688, 16.56, 8,
WIR ,6 NPL , 13.812, 13.65, 16,
But you are correct .. I was using the Symbol Combination Scan on lists that were run on top of each other in a series of separate scans.
I had the Larger or the Base list as the Last one in the Scan so I ended up with the correct results by accident. But it doesn't work if the Scans are totally different.
Back to BASIC if I still remember how to write in it.
Sorry for the error.
I've asked the WebMistress to remove the post that was in error.
Ray |
