SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Politics : Formerly About Advanced Micro Devices
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Petz who wrote (69586)8/23/1999 3:14:00 AM
From: Pravin Kamdar   of 1575984
 
Petz,

dropping geometry down by 28% (0.25 to 0.18) reduces capacitance down by 48% (proportional to size**2)

Perhaps you should consider this statement again.

Also, I believe the main problem with coupling when going to smaller geometries is between the sidewalls of parallel lateral traces, due to the height (or thickness) of the traces needed as widths decrease.

Pravin.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News