SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Politics : Formerly About Advanced Micro Devices
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Joe NYC who wrote (94911)2/24/2000 10:36:00 AM
From: Scot   of 1577185
 
Joe, What is the voltage of the K6-2 500? Some of the older motherboards don't have Voltage settings for less than 2.8V

I believe it is 2.2V. Most (all?) super socket 7 MBs should support that voltage. But you may be out of luck with an older socket 7. Supposedly, the .18 k6-2+ was also at 2.2V for compatability purposes. I don't know how they pulled this off, but that what Ace said in their review. But we'll probably never see the k6-2+, so the issue is moot.

-Scot
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News