SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Strategies & Market Trends : TA- Advanced GET
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: david kohn who wrote (1365)8/1/1999 8:04:00 PM
From: Lenny Rosow  Read Replies (1) of 1551
 
David,

I also have been working on the Gann box for some time now. I don't know if you are already doing this but I'll through it out anyhow.

Before you click on the Gann box in GET shrink your charts down through the use of the chart tool box. You can tighten the distance between the bars as well as shorten the height of them. This allows you to see the whole Elliott move vs. just 1 or 2 of the waves on the screen.

Now turn on the Gann box and start from wave 2. When you decide on the final resting place for the box set it into place. Then go back up to the chart tool box and hit the reset button which will reset your charts back to its original starting point and scale but now with the Gann box as well.

Hope this helps - Lenny
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News