SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : Rambus (RMBS) - Eagle or Penguin
RMBS 87.20-3.3%Nov 20 3:59 PM EST

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Bilow who wrote (29084)9/9/1999 7:08:00 PM
From: John Walliker  Read Replies (2) of 93625
 
Carl,


From the above, it is quite obvious that given two memory systems of the same size, the rambus memory system is going to use about twice as much power.


To make power consumption comparisons it is necessary to quote the supply voltage as well as the current. It is also necessary to know the duty cycle in each state. What you say is not obvious as the data is incomplete.
The figures you quote do not tally with the Samsung data sheet I downloaded a few days ago [rdram128dAbook.pdf].


RDRAM blocks consuming power @ Tcycle=2.5ns

Idd, PDN 3000uA max
Idd, NAP 4mA max
Idd, STBY 105mA max
Idd, ATTN 165mA max
Idd, ATTN-W 575/625mA max 16/18 bit
Idd, ATTN-R 490/520mA max 16/18 bit

STBY is the normal idle state of the RDRAM.
Note also that there are low-power self refresh versions available too.

Vdd = 2.5 V
Vcmos = 2.5V or 1.8V

The CMOS interface consumes power in all power states. b. This does not include the IOL sink current. The RDRAM dissipates IOLxVOL in each output driver when a logic one is driven.

Vol cmos = 0.3V @ 1 mA max

Not very much power.

John
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext