SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Gold/Mining/Energy : Strictly: Drilling and oil-field services

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Roebear who wrote (52943)10/13/1999 9:18:00 PM
From: Roebear  Read Replies (1) of 95453
 
Specifications

The Henry Goodrich is a Mitsui SES 5000 4th generation design twin
hull semi-submersible Mobile Offshore Drilling Unit built (1985) to national
authority requirements for operations in Norway, Canada, U.S. and U.K.
approved DNV + 1A1 and complies with IMO, SOLAS, and UKCS
regulatory requirements (1998). The mooring system is a 12 point all
chain spread with thruster assist (2 * 7,000 hp thrusters). The Henry
Goodrich has variable deckload capacity (operating mode) of 6,300 mT
and accommodations for 146 persons.

The unit is equipped to undertake exploration and production operations in
harsh environment areas worldwide and in water depths in the range of
65m (213 ft.) to 610m (2,000 ft.). Upgraded in 1992 for High Temperature
and High Pressure (HPHT) operations, the unit has a four ram 18-3/4 in.
15,000 psi Koomey stack and two each Shaffer 10,000 psi annular BOPs,
Varco TDS-3 top drive with Deutag soft torque system and a raised back
up handling system, total riser capacity of 1,600 kips, three each mud
pumps (FB-1600) and four each Thule VSM 100 shale shakers.
VESSEL DIMENSIONS/DISPLACEMENT
Overall length
320.6 ft.
(97.7 m)
Overall width
251.0 ft.
(76.5 m)
Main Deck length
246.1 ft.
(75.0 m)
Main Deck width
246.1 ft.
(75.0 m)
Height to main deck
154.2 ft.
(47.0 m)
Height to bottom shell of deck
128.0 ft.
(39.0 m)
Pontoon length
320.6 ft.
(97.7 m)
Pontoon width
47.6 ft.
(14.5 m)
Pontoon height
42.6 ft.
(13.0 m)
Pontoon spacing
203.4 ft.
(62.0 m)
Column spacing
-- center to center longitudinally
203.4 ft.
(62.0 m)
Column spacing
-- center to center transversely
203.4 ft.
(62.0 m)
Draft and Displacement
Transit
40.0 ft. (12.2 m)
33,160 metric tons
Drilling
92.0 ft. (28.0 m)
49,410 metric tons
Survival
70.0 ft. (21.0 m)
43,602 metric tons
VARIABLE DECKLOAD CAPACITIES
Transit draft deckload - 6,300 metric tons
Operating draft deckload - 6,300 metric tons
Survival draft deckload - 6,300 metric tons
HELIPORT
Equipped to accommodate Sikorsky S-61N or Chinook 234
QUARTERS
Safe and comfortable environment for 146 people
RIG STORAGE CAPACITIES
Drill water
17,120 bbls.
(2,720 cu. m)
Potable water
4,365 bbls.
(694 cu. m)
Fuel oil
11,100 bbls.
(1,765 cu. m)
Liquid mud
3,300 bbls.
(525 cu. m)
Bulk mud
22,500 cu. ft.
(636 cu. m)
Bulk cement
7,500 cu. ft.
(212 cu. m)
Sack storage
10,000 sacks
Base oil
2,350 bbls.
(373 cu. m)
Brine
2,350 bbls.
(373 cu. m)
NAVIGATION EQUIPMENT
Complete high seas navigation equipment, environmental motion
monitoring system and data recording.
CRANES
Two Liebherr Model BOS 75/1300 electro-hydraulic 75 metric tons marine
deck cranes.

Two gantry bridge cranes for handling riser and tubulars.
MOORING SYSTEM
Twelve line system with each line consisting of 1,676m (5,500 ft.) of
76mm diameter DNV K4 chain, and Vryhof Stevin MK3, 18 metric ton
anchors.
MOORING WINDLASS
MHI Model EAL-V-276 electric vertical shaft anchor windlasses
THRUSTERS AND BALLAST SYSTEM
Two Niigata Liaaen 6,904 hp azimuthing fixed pitch variable speed
thrusters with 4.2 m four-blade propellers.

Four Ballast pump rooms, one at each end of each pontoon with two
pumps in each. Valve actuators, valve position indicators, and tank level
sensing devices designed to operate in the event pump room is flooded.
RISER TENSIONERS
Sixteen tensioning units rated for 100,000 lbs. capacity each with 50 ft. of
line travel, 1-3/4 in. wire line.
SWIVEL
Continental Emsco Model LB-650 ton capacity
DERRICK
Maritime Hydraulics, 12 m x 12 m x 55 high, 750 ton nominal dynamic
capacity
HOOK
Maritime Hydraulics, 750 ton rating
MARINE RISER
Twenty joints, Vetco MRF type, 75 ft. long, 21 in. OD x 0.625 in. WT,
seamless X-80 with choke, kill and riser mud boost lines.
COMMUNICATION EQUIPMENT
- GMDSS Communications System
- EB Saturn 3S Satellite System
- ITT MacKay type 2012C main transmitters type 2017A reserve
transmitter
- Type 303A main SSB receiver
- Type 303A reserve
- VHF radios
- Auto telephone system, P.A. system
- Three sound powered telephone systems
DRILLING EQUIPMENT
Pipe Handling System
Maritime Hydraulics vertical pipe handling system with upper, immediate
and lower racker arms. Western Gear catwalk machine and bridge crane
(with electro-magnet load system) for transferring tubulars between pipe
rack and drill floor.

Riser deck, gantry crane with 80 ft. hydraulic catwalk, for transferring riser
and large diameter casing rated at 40 tons.
Drawworks
Continental Emsco C-3, Type II 3,000 hp with hydraulic operated main
and emergency disk brakes and Lebus groove for 1-3/4 in. drill line.
Baylor 7838 eddy current brake and Bauteil PWM-20 controls, CBS-1
Koomey crown block saver.
Mud Pumps
Three Continental Emsco FB-1600 triplex pumps, 1,600 hp (each) 5,000
psi MAWP.
Rotary Table
Continental Emsco Model T-4950-65 rotary table
Top Drive
Varco TDS 3,500 ton load rating and rack back facility with a Deutag soft
torque system.
WELL CONTROL EQUIPMENT
Diverter -
Hydril FS with 49-1/2 in. housing, 500 psi MAWP
BOP Stack
- Two 18-3/4 in. 15,000 psi Koomey double ram blowout preventers
- Two Shaffer 10,000 psi annular BOP's on 18-3/4 in.
- 15,000 psi Vetco EXF H-4 connector
- 15,000 psi Vetco EXF H-4 high angle release connector
- One Vetco "Uniflex" flexjoint
BOP Control System
- Master control (explosion proof) panel located on rig floor adjacent to
driller's console
- Remote control panel located in toolpusher's office and completely
redundant
- NL Shaffer hydraulic controls with acoustic backup
Choke and Kill System - H2S Trim (HPHT Certified)
- 3-1/16 in. 15,000 psi dual choke and kill manifold
- Two Cameron adjustable chokes
- Two Swaco ultrachokes with remote controls
Pin Connector
- Vetco 30 in. hydraulic latch
MUD CONDITIONING EQUIPMENT
- Four Thule VSM 100 shale shakers
- One Brandt Model SRS-3 1,500 gpm desander
TRAVELLING EQUIPMENT
Travelling Block
Maritime Hydraulics 750 ton rating with seven 60 in. diameter sheaves.
Motion Compensator
Maritime Hydraulics Angle crown mounted compensator, 273 metric tons
(600 kips) dynamic (compensating) load, 681 metric tons (1,500 kips)
static pinned and stroked out capacity, 7.62m (25 ft) stroke.
RIG POWER SYSTEM
- Four Wartsila Model 12V32, 5,850 bhp, 4,200 kW diesel engines with
Stromberg model HSPTL 15,855 alternators, 4,145 kW, 5921 kVa, 4160
V AC
- One Wartsila 6R32, 2,869 bhp, 1,800 kW diesel engine with Stromberg
model HSPTL 12/755 alternator, 2,140 kW, 2,675 kVa, 480 V AC,
emergency generator
- GE 4,160 volt switchboard split into two bus sections supplying 480 volt
ship service station board and 600 volt drilling service section board
SAFETY EQUIPMENT
- Four 75-person survival crafts
- Six 25-person life rafts
- One 9-person rescue boat
- Lifejackets, survival suits, smoke hoods
WATER DISTILLATION UNITS
- Two Alfa Laval Nirex waste heat watermakers producing 12,500 gallons
per day each.
FIREFIGHTING EQUIPMENT
Foam system on helideck, deluge on drill floor and well test areas,
automatic sprinkler in quarters. Chemical Fire Smothering Systems in 18
different spaces. Complete Wormald fire and smoke detection and alarm
system covering the entire vessel. Sieger gas detection system with HC
and H2S detectors.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext