SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Gold/Mining/Energy : Birch Mountain Resources BMD-ASE

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Chuca Marsh who wrote (266)10/16/1999 10:45:00 AM
From: Chuca Marsh  Read Replies (1) of 402
 
Take the 4.94 Grams Platinum Figure only for the Birch Mountain High PT Assay figure, SFA I re-iterate: We are .17 OPT PT at the High, repeatable SFGA basis and average may be less...maybe.
We must now, class are you here ( & listening?) divided by 31 !( 31 grams to the Ounce to get an Ounce Per Ton, if you want a Metric TONNE -use a divisor of 28 grams to the Ounce)

So, 4.94 Gram PT divided by 31 = 0.1594 Ounce PER Ton to compare the Flag PT figures below:

IN BOLD are BMD PT high figures to compare and contrast:
XRAL Laboratories, Don Mills, Ontario
Assays, Rathbun Lake Occurrence
Rathbun Township, Wanapitei Anomaly
June 24, 1999

Per Ton

Massive Sulfides
RX307814-Rock Dump
Copper : 22.83%
Nickel : 0.257%
Platinum : 0.038 ounces BM= 0.1594 Ounce PER Ton
Palladium : 0.86 ounces
Gold : 0.007 ounces

RX307815
Copper : 6.4%
Nickel : 0.356%
Platinum : 0.201 ounces BMD= 0.1594 Ounce PER Ton
Palladium : 0.211 ounces
Gold : 0.049 ounces

Gabbro 25% Disseminated Sulfides
RX307816-Rock Dump
Copper : 0.11%
Nickel : 0.322%
Platinum : 0.065 ounces BMD= 0.1594 Ounce PER Ton
Palladium : 0.211 ounces
Gold : 0.005 ounces

RX307820-Rock Dump
Copper : 2.33%
Nickel : 1.29%
Platinum : 0.248 ounces BMD = 0.1594 Ounce PER Ton
Palladium : 0.451 ounces
Gold : 0.086 ounces

Massive Sulfides Sedimentary (3) Matrix
RX307821
Copper : 2.96%
Nickel : 2.18%
Platinum : 0.517 ounces BMD = 0.1594 Ounce PER Ton
Palladium : 1.89 ounces
Gold : 0.075 ounces

Gabbro - 20% Disseminated Sulfides
RX307822: One Square Meter Block At Shaft

Copper : 0.66%
Nickel : 0.536%
Platinum : 0.048 ounces BMD = 0.1594 Ounce PER Ton
Palladium : 0.486 ounces
Gold : 0.0256 ounces

Gabbro 5% Disseminated Sulfides
RX307823 - Small Pit, Nipissing Gabbro

Copper : 0.72%
Nickel : 0.321%
Platinum : 0.0057 ounces BMD = 0.1594 Ounce PER Ton
Palladium : 0.020 ounces
Gold : 0.011 ounces

Of the 22 pulp and rock grab samples taken, these are the assays received from INC
<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>
Thuis we are SIGNIFICANT and should be allowed such CORE INFO:
= 0.1594 Ounce PER Ton
= 0.1594 Ounce PER Ton
= 0.1594 Ounce PER Ton
= 0.1594 Ounce PER Ton
= 0.1594 Ounce PER Ton
= 0.1594 Ounce PER Ton
= 0.1594 Ounce PER Ton
THE Comparison is 7 ( SEVEN TIMES!) at BMD= 0.1594 Ounce PER Ton
Chucka- FOUR TIMES above were are TRIPLE HIGHER NUMBERS and Converse also, Three TIMES BMD is a third or so LESS; once we are about the same! So...this is HOW any miner would compare and contrast.

RE POST:
The HolySgrail:NEW SFA on FAQ Breakthru in technology we all waited for...start your engines!
techstocks.com
techstocks.com
siliconinvestor.com
Q. Why do you believe there is gold in northeastern Alberta?

A. "Scanning electron microscope and standard fire assay analyses have conclusively demonstrated the presence of anomalous quantities of gold and other precious and base metals in rocks in the Athabasca region of northeastern Alberta. To explain the transport and deposition of gold and precious metals in Athabasca, Birch Mountain, together with the GSC, developed the Prairie Gold model. With the fire assay results announced in April 1997, we have become increasingly confident in the area's potential."

Q. How significant are your fire assay results?

A. "First of all, it didn't happen overnight. Prior to April of 1997, we could demonstrate the presence of gold, but it took two years of work using various methods including fire assay, cyanide leach and flotation concentration at several laboratories before we were able to see repeatable determinations of gold content," says Doug Halbe, Metallurgical Consultant.

"And platinum was a bit of a surprise," adds Bob Lipsett, "although we're certainly pleased that it's there given that it's in high demand. The results - up to 4.94 grams of platinum and 0.21 grams of gold per tonne - are encouraging, but we will need to find the deposit before we can determine just how significant these results are."

Birch Mountain's Chairman, Dr. Richard Garnett, elaborates on the Company's recent news: "Our results are solid. We have three fire assays with similar results from Bondar Clegg and Activation Laboratories, two extremely reputable firms. They obtained the samples independent of Birch Mountain. Birch Mountain has been, and will continue to be, very cautious about releasing results of analytical or extraction analyses."

Q. Do you think the Athabasca region has economic potential?

A."Yes, unequivocally," according to Dr. Hugh Abercrombie, Manager, Exploration. "The conditions leading to the formation of the three-trillion tonne Athabasca oil sands deposit also appear to control the flow of gold-bearing brines. Microdisseminated, sediment-hosted gold deposits, such as Carlin in Nevada, typically form over a few hundred thousand years to a million years. In contrast, mineral deposition in northeastern Alberta occurred over a much longer period, perhaps tens to hundreds of millions of years. This, and other factors, lead us to conclude that there is tremendous potential for the formation of large-tonnage deposits in Alberta that could rival some of the largest gold deposits in the world."

Q. Where and how do you expect to find an economic gold deposit?

A. Dr. Jon Thorson, Exploration Advisor, responds: "In our exploration program, we are using geology, geophysics and geochemistry to correlate Prairie Gold mineralizing processes with the structural, stratigraphic, hydrogeological and geochemical elements that are essential to the formation of an ore deposit. The Prairie Gold model tells us that an ore deposit in Athabasca will be found in a large volume of fractured limestone containing gold, silver and other precious and base metals. Evidence from other sediment-hosted gold deposits further suggests that an ore deposit will be found where structural and stratigraphic conditions enabled brines to flow into areas that had the ability to capture metals."

Q. Where else would the Prairie Gold model apply?

A. "The first area is Dawson Bay in Manitoba, where Birch Mountain has acquired a Special Exploration Permit covering 15,073 hectares. New occurrences of microdisseminated gold and polymetallic minerals were discovered here in 1996 by the GSC and Manitoba Energy and Mines," says Hugh Abercrombie. "We believe we can recognize and identify occurrences of this mineralization elsewhere in the WCSB and in other basins around the world that show geological, geochemical, structural and hydrogeological features similar to Athabasca and Dawson Bay." He also adds that "Birch Mountain has initiated a program to review and prioritize regions in and outside of North America that have the potential to host other Prairie Gold deposits."






ASE:BMD

Birch Mountain Resources Ltd.
3100, 205 Fifth Avenue S.W.
Calgary, Alberta Canada T2P 2V7
Tel. 403 262 1838 Fax 403 263 9888


Douglas J. Rowe, President and CEO


Jane Quinn, shareholder services

RE READ:
birchmountain.com
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext