SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : Rambus (RMBS) - Eagle or Penguin
RMBS 92.75+5.2%3:59 PM EST

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Alan Bell who wrote (32537)10/22/1999 8:58:00 PM
From: Bilow  Read Replies (2) of 93625
 
Hi Alan Bell; Re: When a driver wants to assert a high, it doesn't do anything. When it wants to assert a low value, it sinks exactly enough current to pull the characteristic impedance (and terminator value) down 0.4 v to 1.4v which is the reference voltage level.

While John Walliker agreed with this, I believe it to be incorrect:

The RDRAM outputs are current mode. They put out enough current to drop the voltage at the point of connection by about 0.4volts. Thus the drop isn't necessarily to 1.4v, instead the drop is to the "launch" voltage minus 0.4 volts. What John figured out is that there may be cases where the "launch" voltage is already dropped by 0.8 volts.

-- Carl
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext