Dream Machine ( Build your own PC ) Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Dream Machine ( Build your own PC )

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Dave Hanson who wrote (9876)	1/8/2000 2:10:00 PM
From: Spots	Read Replies (1) of 14778

>>The board isn't touching the case at all, but the spacers are metal The spacers are SUPPOSED to ground the mobo to the case. You'll get a ground loop if you isolate it. That's why the mobo screw holes have those big grounding rings where the screw-head comes down. However, in the case that the mobo touches somewhere else that you'd need to insulate it. (Yes, pun intended as usual. Feel free to groan while I grin <G>.)

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next