CyBerCorp.com Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Non-Tech : CyBerCorp.com

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: manny t who wrote (640)	5/22/2000 8:43:00 PM
From: jebj	Read Replies (1) of 1001

>Do you use CyberX? If so,do you use CyberXchange limit,or do you go direct? I was very flustered by today's events with CyberX,and could not trade. - Manny T. Yes, with Qcharts. What one must remember with CyberXchange Lmt is that no matter what you put in the window it is going to try to get a better price. So if you knowingly put a lower bid in it will still try to improve on whatever the bid happens to be at that time. This seems to work Ok for entering a trade but not so well in getting out. The manner in which one must TYPE the MM in when using Snet is not good - by the time one selects Snet, then the MM and them the price the MM has already moved in most cases so you end up chasing. Cyber needs to make some serious changes to how one loads the MM into the program, IMO. A dropdown menu and a click on the MM is a must - if not an even better and quicker means. HOWEVER - IF they go to this manner they MUST give us a single click button to re-load CyberXchange Lmt back in quickly since this is a much used feature. This whole procedure needs to be looked at, I think. Is just isn't working as is. jb

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next