SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Don't Ask Rambi
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Ilaine who wrote (51551)5/31/2000 10:16:00 PM
From: Ish  Read Replies (2) of 71178
 
<<Well, let me make sure I am being specific. The concave part of the curve and the bevel are on the same side. Not sure about the lip, I left the spikes in the car and will have to go check. Back in a few.>>

Hokay. I'm staying up to straighten this out.

The spikes are beveled in the opposite side of the offset of the head. When being pounded in they tend to move away from the bevel and engage the lower flange of the rail. You want to test this, cut a bevel on a 4x4 and pound it in.

Now a tie replacer splits the tie between the tracks and with a lot of horse power and hydraulics shoves the tie halves from under the tracks to the outside. The inside spikes will curl toward the bevel. The outside spikes will curl away from the bevel.

Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News