Don't Ask Rambi Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Don't Ask Rambi

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Jacques Chitte who wrote (51603)	6/1/2000 1:35:00 PM
From: Gauguin	Read Replies (1) of 71178

>>I am hereby converting to the Ishian catechism of tie splitter induced bending.<< The part I am missing here is how spikes get bent that we are pulling out of the plates. From intact spur sections. I can understand how spikes would get bent getting ripped up when a tie is halved and shoved apart, but these spikes are still in the ties, and are bent. When they come out. I don't know if they leave the spikes along the track, but I'll bet they don't. No way. That doesn't mean some aren't left/lost, but in my guess these spikes we are finding have come loose. I THINK, that the spikes on this side spur by the mill are all the spikes originally installed on the rail. It just isn't that old. So anything would have happened to the spikes in installation or while they were in the tie. Nothing else has happened to them. When would it? When ties get ripped out and replaced, that's a different thing. Then I would think they're taking the spikes with them, because they're not going to leave them by the track. No way. But you still might find some. I'm going to photograph old and new ties. Got em both within .3 miles. I bet there are NO spikes by the new section, but we'll see.

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next