Medinah Mining Inc. (MDHM) Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Gold/Mining/Energy : Medinah Mining Inc. (MDHM)

MDMN 0.0001000

0.0%

Nov 28 9:30 AM EST

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Mike Gold who wrote (22358)	6/6/2000 7:52:00 AM
From: Mike Gold	Read Replies (1) of 25548

Medinah Update: IR says Gordon House is leaving for Chile Friday with drilling to start within a few days after his arrival. 2 drill rigs will be employed for the 6 hole program. One can only assume that new monies have been obtained and that an annoucement about funding could be imminent. A hammer drill(instead of the previous plan to use a RC drill) will be used to begin the holes; brookes.ac.uk (From the link: "Porphyry copper, for example, can be drilled at a rapid rate of about 1 metre a minute, and it is therefore possible to drill between 150-200 metres in an 8 hour shift." ) and a diamond drill will be used to complete the holes. (Diamond drill through the zone of minerlization-the hammer will cut through the overburden.) Medinah is going full tilt this time around to locate and intersect the porphyry. Hold your breath-here we go! Cheers!

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next