SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Computer Learning
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: mr.mark who wrote (10197)6/20/2000 11:30:00 AM
From: Magnatizer  Read Replies (1) of 110634
 
Mark

I checked APC site and the reference was the same as what the "manual" I have says. Beeps simply mean stopping surges. It was just odd to me that: 1) the other APC unit plugged into same wall outlet did not beep and 2) computer froze right as the unit beeped.

I think #1 was addressed yesterday as there was talk of adjusting the sensitivity of the APC unit. The unit which beeped is quite a bit newer then the other unit so it may/is likely to have a different setting.

If it occurs again, i.e. beep and puter freeze, I will dig deeper.

ht
Mag
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2026 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News