SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : Cyrix 1 Where anything goes
CYRX 8.395+0.8%Nov 7 9:30 AM EST

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: doug carder who wrote (383)5/13/1997 2:26:00 AM
From: Theodore Johnson   of 640
 
Well fellas, I finally got my system. The components are listed below. I have yet been able to get it to boot up. Im at wits end one week after its been purchased.

I have a MTechnology Mustang R534 F mobo w/ a Cyrix 6x86 L P-200+ CPU, 2-32 MB SDRAM 168 pin 10ns 100MHz RAM, Diamond Stealth 2000XL 4MB video card, Creative labs AWE 64 sound Card, 2.5gig Western Digital HD, 16X goldstar CDROM, 3.5 floppy drive, 17"MAG .26mm, and USRobotics 56.6kb/s courier v everything modem.

I have set the jumpers according to the mobo manual and rechecked them 4 times now. The cables have all been checked and rechecked to insure proper hoookup. I have replaced the video card with a ISA slot card. I have moved the video card to different PCI slots also with no sucess. I have tried the video card and monitor on a different computer and they both work. I can hear the HD starting and ticking (counting the RAM?) . The light on the CDROM goes on then off. The floppy light never lights up and I never get any video output on the monitor. When I remove the RAM the computer beeps once every 1-2 sec. Why isn't the monitor receiving a signal from the mobo or video card????? Can anyone help? PLEASE? Email Tjohn89065@aol.com. Thanks
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext