Advanced Micro Devices - Moderated (AMD) Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Technology Stocks : Advanced Micro Devices - Moderated (AMD)

AMD 207.67

+2.2%

3:59 PM EST

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: that_crazy_doug who wrote (6462)	8/24/2000 3:53:00 PM
From: Petz	Read Replies (2) of 275872

Extrapolating the power consumption for 1.3 GHz and 1.4 GHz Willys to 1.5 GHz gives an estimated power consumption of 71.4 watts. By comparison, the 1.1 GHz Athlon uses 55.1 watts maximum thermal power and the CuMine 1.13 GHz uses 35.5 watts max thermal power. I posted this yesterday, the numbers were based on a c't German article which stated that the 1.3 GHz P4 uses 36 amps at 1.7 volts and the 1.4 GHz P4 uses 39 amps at 1.7. The 1.1G TBird uses 35 amps max, but AMD specifies the max current when the voltage is 0.1 volts above its normal value, at its maximum legal limit. At nominal voltage the 1.1 GHz TBird dissipates 55.1 watts of maximum thermal power, which is considerable below the 61.2 watts of even the 1.3 GHz P4. Petz

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next