SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : Rambus (RMBS) - Eagle or Penguin
RMBS 96.40+5.4%Dec 19 9:30 AM EST

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: mishedlo who wrote (52619)9/5/2000 12:56:28 PM
From: jim kelley  Read Replies (1) of 93625
 
The DDR proponents are essentially agreeing that DDR is too unstable to be used in DIMM's. Soldering the parts down does not increase the initial cost but it would make any mother board yield problems very difficult and costly to fix. Soldering the parts to the motherboard would reduce the impedance problems but not eliminate them.

It would also fix the size of the PC memory, i.e., it would not be possible to add memory to your system or replace a defective DIMM.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext