SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : Rambus (RMBS) - Eagle or Penguin
RMBS 107.05+9.0%Feb 6 3:59 PM EST

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: John Walliker who wrote (52871)9/8/2000 4:53:59 PM
From: Bilow  Read Replies (2) of 93625
 
Hi John Walliker; Re "You have previously stated that DDR chips use exactly the same die as SDRAM devices but with different metalisation to reconfigure the bus drivers, so why would a chip configured for SDRAM operation use considerably more power?"

SDRAM has a power supply of 3.3 volts, while DDR uses 2.5 volts. Power is proportional to square of voltage x capacitance x frequency. Capacitance stays the same, while frequency is proportional to bandwidth, more or less, and we are talking about power per bandwidth. So DDR uses about (2.5/3.3)^2 = 57% of the power of SDRAM for the same bandwidth.

-- Carl

P.S. I love easy questions.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext