ARM Holdings (Advanced RISC Machines) plc. Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Technology Stocks : ARM Holdings (Advanced RISC Machines) plc.

ARMH 69.38

-1.4%

11:15 AM EST

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Mats Ericsson who wrote (565)	10/5/2000 6:39:38 PM
From: Mats Ericsson	Read Replies (1) of 912

Son of StrongARM to ship next year (No engeneer - me - but this voltage is so light seems that we could have a batteryoperated PC device here. Xscale could be run at 0,75 volt and Device will deliver 200 MIPS there; recent StrongARM gives that at 1,5 at volt.) Son of StrongARM to ship next year By: Andrew Thomas Posted: 05/10/2000 at 17:17 GMT Intel's low power consumption XScale architecture will eventually replace StrongARM in Chipzilla's portfolio, Ron Smith, VP of the chip behemoth's wireless communication group, said today. XScale has evolved from StrongARM - with which it is instruction set compatible - and which Intel has a unique licence to modify, according to Smith. The first handheld devices should appear in the second half of 2001 and feature extremely low power consumption - Intel is now referring to mW per MIP. An XScale device should be able to deliver 1,000MIPs at 1.6volts and around 750MIPs at 1.3volts while consuming just 160mW of power. The 0.18micron devices will feature a new power management system called Dynamic Voltage Management (DVM) which will increase voltage dynamically as processor load increases, such as when playing MPEG video, and drop back down when the CPU becomes more lightly loaded. XScale devices will feature two power steps, the values of which will vary according to the performance of the device. High performance parts will switch between 1.6V and 1.3V, while lesser chips will run at either 1.0V or 0.75V. Asked whether XScale had any rivals, Smith replied "Just one - StrongARM". ®

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next