SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : Nokia (NOK)
NOK 6.530-0.2%3:59 PM EST

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: foundation who wrote (7818)10/20/2000 9:18:33 PM
From: Eric L  Read Replies (1) of 34857
 
Ben,

<< Simply stated, being ANSI-41 and GSM Map compliant means that CDMA and GSM based systems will communicate without smart cards or dual mode chipsets. >>

Sorry Ben. That is ABSOLUTELY WRONG! Qualcomm lost that battle a long time ago.

A "physical" & "removable" SIM (USIM) or as the CDG world calls it, a R-UIM, is a mandated ITU IMT-2000 component.

OHG made absolutely sure the good Doctor FINALLY got this message and the 6 3GPP SDO's drove it home.

In order to get into compliance, early this year, CDG fast tracked an R-UIM specification through TIA. CDMA became the LAST major technology in the world to approve the use of a SIM/USIM for the requisite capability to authenticate to the 350+ GSM networks on air.

Without a USIM (R-UIM), no cdma2000 chipset is IMT-2000 compliant, and no CDMA terminal can authenticate to a GSM, VSAT, GPRS, TDMA-EDGE, GSM-EDGE (if that ever exists), or UMTS network.

For this reason (and several others) The Qualcomm MSM5000 chipset (built to Qualcomm's draft specification of 07/99), is therefore not IMT-2000 compliant. The (2G)MSM3300 is. The (2.5G) MSM 5105 will be.

<< This, however, is the future >>

SDR does NOT change this.

- Eric -
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext