Cyrix 1 Where anything goes Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Technology Stocks : Cyrix 1 Where anything goes

CYRX 8.240

-1.1%

11:33 AM EST

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: burn2learn who wrote (475)	5/24/1997 3:47:00 PM
From: Investor A	of 640

Mike, Set the jumper for 75 x 2 to overclock your P166+. I have been amazed by the overclock friendlyness of this board. You might want to try your luck if 166Mhz would work for you. You are going to love this cheap power. Download the 6x86opt.exe from Brian Davis Page: ionet.net Insert the line c:\dos\6x86opt.exe in the autoexec.bat. 6x86opt.exe will boot the system performance of this board with 6x86 even further. FYI, VXPro is the relabelled VIA VP-1 580! If you use Win95, I would suggest you re-install the Win95 otherwise you might experience lots of general protection errors. If you use Win31/DOS6.22, I would suggest you to run memmaker.exe to reorganize/optimize the settings. With 10ns SDRAM, you could set your CMOS setting for the fastest ones. Also, you still need CPU/FAN. Let me know how the SDRAM works with your EDO/FP RAM on this board. When everything setup right, you will feel very comfortabe to tell every Pentium users that YOU ARE S***D! Have fun! Fuchi ... who loves Cyrix's innovations Please support the PC industry & protect consumer interest techstocks.com

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next