Advanced Engine Technologies (AENG) Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Technology Stocks : Advanced Engine Technologies (AENG)

AENG 0.0001000

0.0%

Mar 7 3:00 PM EST

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: 246810 who wrote (3370)	11/24/2000 11:46:50 PM
From: 246810	Read Replies (1) of 3383

This certainly is an interesting engine. It is hard to put the subject down. I was wrong about the lady, in part. Of course, she is wronger, but here is the problem. I mentioned "opposed piston" yesterday because I had done some sketching last year to put another set of pistons on the other side of the "cylinder." I guess my mind didn't comprehend how "free piston" had anything to do with this device and I jumped back onto "opposed piston." Well, as the patent diagram clearly shows, it is neither "opposed" or "free," so the lady was clearly wrong. Now that she is a board member it is also clear that whatever she says should be disregarded as "company talk" so it really doesn't matter. Now here is the really interesting finding from this error. I have carefully read the "opposed piston" site I linked yesterday. Notice this fellow in Denmark has connected two otherwise unconnected opposed pistons with two Honda Synchronous electric generators wired in parallel. No gears, just wires. He claims this keeps the two pistons in "sync." This is remarkable to me. Cornbread, you are an electrical engineer. Does this work? Suppose you put opposed pistons on the OX2, ran each shaft out on opposite sides and connected them to such generators to keep everything in time. Then use the electricity (and heat) generated for co-generation, hybrid auto or just electricity. According to "Nils the Dane," the efficiency would be very high. Maybe that is only for a "blown" 2-cycle, but this rotary piston design can be run either two or four cycle by modifying the cam and adding a blower for the two cycle to get adaquate aspiration. By the way, here is a link to what I have now found for "free piston." solstice.crest.org

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next