SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Microcap & Penny Stocks : Isonics Corp. ISON
ISON 0.00010000.0%Nov 3 4:00 PM EST

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: redbird who wrote (968)12/4/2000 7:36:40 AM
From: GARY P GROBBEL  Read Replies (1) of 1099
 
redbird...this is some of the buzz going around:

AMD tests 'super silicon' to beat heat problems
By: Andrew Thomas
Posted: 30/11/2000 at 12:46 GMT

When we cast doubt on AMD's abilty to produce an Athlon running at 1.7GHz that wouldn't run so hot it melted the solder on the mobo, we received the usual flood of 'you're in Intel's pocket' emails.

But in among the venom lurked an interesting item: a reader claimed that, for over 12 months, AMD has been quietly producing test chips using a new, pure version of silicon with greatly enhanced thermal properties, making a 1.7GHz Palomino a more practical proposition.

California-based Isonics produces an isotopically pure silicon which has much better thermal conductivity than natural silicon, meaning that heat can be removed more effectively. Isonics won't confirm it's working with AMD, stating only that "a major microprocessor manufacturer has modeled isotopically pure silicon wafers and has told us that the peak temperature of their advanced 1GHz microprocessor was reduced by 35 degrees celsius."

Heat sinks and on-board fans are not practical when CPU power goes above 100W. Intel's new Pentium 4 is rated at around 50W. Closed-loop cooling systems can increase the performance of existing designs, but they would cost more than the microprocessor itself.

Isonics believes it can profitably provide isotopically pure silicon bulk wafers for less than $10 per microprocessor, possibly much less. This compares with $10-30 for a fan and heat sink and looks a far better bet than a closed-loop cooling system costing several hundred dollars.

Isotopically pure silicon is chemically the same as regular silicon and can be used in existing manufacturing processes without any changes.

Warning: science ahead
Silicon exists in nature as three stable, non-radioactive, isotopes: Si-28 (92 per cent), Si-29 (five per cent) and Si-30 (three per cent). By purification at the sub-atomic level, it is possible to remove essentially all of the Si-29 and Si-30 leaving isotopically pure Si-28, which has a more perfect crystal structure.

This more perfect crystal structure exhibits reduced phonon-phonon and phonon-electron interactions which increases certain transport properties, such as thermal conductivity. It has been demonstrated in the laboratory that isotopically pure Si-28 has 60 per cent better room temperature thermal conductivity than natural silicon with its three isotopes.

Improvements in other physical and electrical properties are also theoretically possible. ®

Related story
1.7GHz Athlon too hot to trot
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext