SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : Intel Corporation (INTC)
INTC 37.28-0.6%3:59 PM EST
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: aldrums who wrote (126193)1/28/2001 2:06:02 PM
From: Dan3  Read Replies (1) of 186894
 
Re: Help! I am running dual Pentium III 733 MHz flip chip processors

The stop @ address can sometimes be used to diagnose problems by reviewing the list of loaded drivers that appears below the stop error. The list will include load addresses that will let you (sometimes) determine which driver caused the error. Then update that driver, or replace the offending component with a different model if it's something replaceable like a network card - which will use an entirely different driver. And if the component is at fault, you'll have replaced that, too.

Good Luck,

Dan
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News