Computer Learning Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Computer Learning

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: doniam who wrote (15954)	2/8/2001 6:47:58 PM
From: Nemer	Read Replies (1) of 110626

if you haven't already done the things reccoed ... try entering a blank password ... by that I mean at the request for password hit enter button ... I'll bet that it will take it ... ---------------------------------------- should that NOT do it .. the jumper which will eliminate the password WILL be indentified in little bitty enseency tincey print on the MB probably with the identifier CPS .... and as Cat Lady said, normally close to the battery itself... and it will be either open (as in the jumper is on one post) or NO jumper at all there it is easy to do ... matter of fact I prefer it to batt removal which "sometimes" gives me problems with the time required to make sure ... 1- turn off box ... you knew that BUT ...reminders aren't bad .....gggg 2- short the two posts with a jumper 3- turn on box .... at this step you will know if you did it right cause the screen will say something like this .. Password cleared by jumper CPS 4- HOLD down the delete key during boot up so that you may enter the BIOS setup to re-enter preferences 5- turn off box 6- remove jumper 7 - turn it on 8 ==== go buy a stock that will GO UP tomorrow .... step 8 is optional ....

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next