SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Computer Learning
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: mr.mark who wrote (16200)2/11/2001 10:29:08 PM
From: Cheeky Kid  Read Replies (1) of 110652
 
I would not use water either, the only part of my keyboard that will see water is the plastic keys you pop off and the plastic case housing.

The PC circuit board contacts will be cleaned with rubbing alcohol, and the switches and springs replaced.

For most keyboards you get with a new computer, they are cheap 20 dollar throw away boards. They are not worth cleaning or fixing, and most will not get them back together again if they tried to take them all apart an clean them.

You have approx 104 key caps, 104 key springs, 104 key switches (not all the same size), the odd support for the space bar, circuit board(s), screws, etc..

IMO
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2026 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News