SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Computer Learning
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Nemer who wrote (18343)4/4/2001 9:47:26 PM
From: Dustin  Read Replies (1) of 110652
 
Video Card problem update

try swapping the two PCI cards ....first and see what happens

I switched the cards. When booting the system found both devices and installed the drivers. The problem comes when I go to enable both monitors. When click OK at the Display Properties-Settings screen everything freezes. ALT-CNTL-DEL shows that Msgsrv32 is not responding. I tried rebooting a couple times but this kept happening. I believe that if I remove the new TNT2 card again everything will work fine like before.

EDIT: I just removed the new card again, and the computer is back to normal.

there should be NO little yellow question marks
I checked this before going into the Display Properties and there were no exclamation or question marks.

I'm about ready to throw these cards off my 14th floor balcony and buy a two-port card ;-)

I guess I should try removing that patch, although i'm not even sure how. It said I would need the Win98 CD to do it, which I do.

Anymore suggestions?
Dustin
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2026 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News