Advanced Micro Devices - Moderated (AMD) Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Technology Stocks : Advanced Micro Devices - Moderated (AMD)

AMD 233.54

-1.8%

Nov 7 9:30 AM EST

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Tenchusatsu who wrote (40489)	5/18/2001 9:02:47 PM
From: THE WATSONYOUTH	Read Replies (2) of 275872

Back in August 2000, MicroDesign Resources published a chart of workstation processors. In it, the PPGA Coppermine is listed as having a die size of 106 mm2 and an estimated manufacturing cost of $40. It's kind of hard to drive that cost down to a point where a price of $30 would lead to profits. I can assure you that they are off by a mile. It costs Intel (as it does nearly everyone else) less than $2000 (not including depreciation) to process a wafer thru their 6 level metal process. I think P3 is somewhat less than 100mm2 (97mm2) on its last process iteration. That probably means about 270 chips per wafer of which (with 70% yield) you would expect about 190 good die per wafer. Thus, their cost is under $10 per chip. Even if it costs $10 per chip for packaging, that only comes to $20 per chip. Of course, if you want to confirm that Intel's yield is only 35%, then a $30 cost would be possible. THE WATSONYOUTH

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next