SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Non-Tech : Amati investors
AMTX 1.550+4.0%3:59 PM EST
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: bill c. who wrote (19649)6/12/1997 11:55:00 PM
From: Steve Macica   of 31386
 
Hi Bill,

>> Steve: I recommend getting the hard-copy 10 page report from Teledotcom. For some
reason the WWW site leaves out 60% of the data facts.... Ariel CAP RADSL used "I
think" 6watts, Aware used 5watts, Performance 6Mbps none RADSL used 4.5 watts,
Paradyne used 8 watts, Westell used 7.2 watts, etc.... until later.

Don't have a copy of the report. The numbers you quote are for power consumption of the modem units. I'm referring to the power sent down the line from the modems transmitter. This will have allot to do with the performance numbers over long noisy loops. A hot transmitter will look good on a simulated test such as this but in the real wire plant, overall performance will suffer due to NEXT. There are other Spectral Compatibility issues that arise too.

Did they measure the xmit power? We did at the Bellcore Olympics.

Thanks for the great input bill

later
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News