SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : Rambus (RMBS) - Eagle or Penguin
RMBS 101.61+2.8%Dec 5 9:30 AM EST

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Bilow who wrote (74062)6/1/2001 7:40:56 PM
From: wily  Read Replies (1) of 93625
 
Carl,

Forgive me for not knowing these basics after so long:

Could you show me the math that gives 3.2GB/s for the RDRAM setup and 1.6GB/s for DDR? Is it that, per channel, Rambus is doing 2-Byte accesses at 800MHz versus DDR doing 8-Byte accesses at 200MHz on only one channel? And since Rambus has two channels, it has twice the bandwidth of DDR?

So, even if DDR has 4 sockets, it will still only be one channel, and therefore, still only 1.6GB/s, or 1.9GB/s if you want to use DDR266.

If I have this right, then what they are implying is that it is much easier and cheaper for RDRAM to have a second channel than it is for DDR, right?

wily
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext