Computer Learning Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Computer Learning

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Graystone who wrote (21107)	7/1/2001 10:38:56 AM
From: KC Jones	Read Replies (3) of 110652

Here is my situation, I have a 600E running win 98SE It has two network cards, an AMD PCNET Family Adapter with the protocol TCP/IP, NetBEUI (I have been using this one for the internet, so I know it works). The other network card is a D-Link 530 with protocols TCP/IP,NetBEUI. There is also a Network Telesystems P.P.P.o.E.Adapter needed to run the internet (I use Sympatico).The primary logon is Windows Logon. I have tried changing this to Client for Microsoft Networks without any effect. I have named this computer server and the workgroup is serverworkgroup. In Network Neighborhood I can see server only. The second computer is a 500 running win 98SE. It has a D-Link 538 Network card with protocols IPX/SPX, NetBEUI, and TCP/IP. I also have the Sympatico Adapter with the same protocols.I have named this computer Client and the workgroup is serverworkgroup. In Network Neighborhood if I use Windows Logon I see nothing. I I use Client for Microsoft Networks I see Client and Server. When I click on Server I get the message that it is not accessable. The router is a D-Link DI-704 with four ports for RJ45 connectors. There is also a port for connection to a modem with a RJ45 connector ( www. D-Link.ca). Each port has an indicator light showing connection. There was no software with the router. You have to go to their website ( 192.168.0.1 "admin" to setup the damn thing, but if you can't get on the internet with it how do you do this? To try and connect just the two computers I connected the 600E with the 530 to the router and the 500 with the 538 to the router and disconnected the modem from the AMD in the 600E. Can't connect What am I doing wrong? Are there other settings that I am missing here? I should also mention that I am running ZoneAlarm. Sorry I don't live in Hawaii!! KC

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next