SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Strategies & Market Trends : Stock Attack II - A Complete Analysis
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Challo Jeregy who wrote (15838)8/19/2001 7:15:19 PM
From: PMG  Read Replies (1) of 52237
 
Well, you description was not very good...

The following hardware setup should make sense:

- turn off everything
- plug the DSL Modem to the phone line
- plug your network cable into the DSL Modem
- unplug your Cable modem from the network
- check what kind of network cable you need for the connection of you DSL to you USB-NIC (normal or cross-pin?)
- if you have a hub, you have to do the same check. You can try to use the uplink port to simulate a cross-pin cable
- leave your USB-NIC attached to your USB port
- power all on
- check device manager that the USB-NIC driver works fine
- uninstall all drivers that relate to the cable modem (but keep in mind what devices you delete)
- Check the network settings. At this stage only MS-Client, TCP-IP and the USB-NIC hardware driver should be installed, maybe some dialup-adapter.
- If you made changes, restart windows. Check again in device manager.
- If everything's ok, install your DSL driver. Try to keep the overview and try to identify what exactly you do. Some kind of PPPoverEthernet protokoll should be installed.
- Get the appropriate driver version for your windows version
- Check and read the right portions of the readme files (prior to install).
- If the installation seems to be done, check device manager and network settings for changes.
- If software is ok and it does not work check the cable issue
- take you time and concentrate on what you do to localize the problem, then fix it <g>
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2026 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News