SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : Advanced Micro Devices - Moderated (AMD)
AMD 214.990.0%Dec 26 9:30 AM EST

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: hmaly who wrote (55456)9/15/2001 10:31:12 PM
From: dale_laroyRead Replies (1) of 275872
 
>Heavy water AFAIK has the same limitations as water, in that when you lose the water, the core must be shut down to avoid a meltdown. The Helium reactors shut down automatically, as you need Helium to sustain the reaction. Helium is also inert, and as such doesn't carry radiation out of the core should a leak occur.<

Not exactly. I am not sure that heavy water can be used as a moderator, but it certainly absorbs few neutrons than light water, which means that the neutron flux in a heavy water reactor can be much less than in a light water reactor. I am quite certain that, while the coolant in a heavy water reactor might not be able to moderate the neutrons alone, it is needed to at least "finish the job". Thus, a coolant loss will lead to an automatic shutdown.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext