SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : ceramics-clay-pottery
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Crocodile who wrote (2)11/11/2001 8:39:21 PM
From: AugustWest  Read Replies (1) of 338
 
Most, all of my galze formulations are lead free. Actually, the lead would burn out at such high temps.(2350°F, cone 10) Regardless though, when moxing glazes of any kind, and that goes for mixing dry clay formulas) is it mandatory to wear a mask and have a good venting system.

In the early days I admit to not wearing masks, I can't say it has proven to be detrimental yet, but now, I will not do anything with dry chemicals with out a good mask and venelation system in place.

I also need to address the venelation requirements of a gas kiln which I negated to mention in post #4.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2026 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News