ceramics-clay-pottery Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : ceramics-clay-pottery

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: AugustWest who wrote (33)	12/8/2001 10:11:32 AM
From: AugustWest	Read Replies (1) of 338

Δ10 reduction glazes I will be using for the glaze firing Copper Red(modified from Ogden) 5.0% Custar Feldspar 2.0% dolomite 2.0% China clay 1.0% bone ash 0.5% tin oxide 0.3% copper carbonate - double % for 20 lbs dry glaze mix. Variationa 1)add 0.6% copper carb. 2)add 0.05 colbalt carb. PSU Woo Blue* 4.5 whiting 10.5 custar feldspar 3.25 Kentucky ball clay 6.75 silica 1.0 red iron oxide 1.0 rutile add a dash of colbalt oxide August's celadon* 43% custar feldspar 22% whiting 10% Ky. ball clay 25% flint * add 4% red iron oxide ________________________ more later.... Can't find my temmoku and a few other recipies. Heading out to the gas kiln to see if i left notes there. Also need to inventory chemicals.

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next