Advanced Micro Devices - Moderated (AMD) Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Technology Stocks : Advanced Micro Devices - Moderated (AMD)

AMD 231.83

+1.7%

Jan 16 9:30 AM EST

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: tejek who wrote (74916)	3/19/2002 8:35:08 AM
From: hmaly	Read Replies (1) of 275872

Ted....Joe, actually I came over here to ask you or someone else.....do you know if the hammers are supposed to start at 1 G? And if not, at what level?<<<<<<<< While no one has stated the mhz, it is possible to get an accurate guess. Jerry and Dirk have stated that Hammer would have an 3400+ rating. Yesterday there was a report that Hammer would have a 20 to 25 % IPC improvement over XP. If the improvement is at the 25% level, then the Hammer would be running at (.75x3400) 2550 rated XP. Right now the XP2000 runs at 1.67 ghz which is a 1.2 multiplier so 2550/1.2= 2.12 ghz. IF the improvement in OPC = 20%, then the Hammer would run at the same speed as a 2720 XP which would be 2.26 ghz. So if the 3400 rating is correct and the 20 to 25% IPC improvement is correct, Hammer should run between 2.12- 2.26 ghz.

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next