Formerly About Advanced Micro Devices Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Politics : Formerly About Advanced Micro Devices

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Tenchusatsu who wrote (149154)	8/6/2002 7:54:34 PM
From: Petz	of 1578096

Tenchusatsu (edited)- here's the post Message 17813182 Also read the responses. and here's the link linear.com and the key sentences: The LTC3719’s 5-bit VID code corresponds to the core voltage range of AMD’s Hammer CPUs. Core voltage range is from 0.8V to 1.55V and core current can range from 15A to 40A. From that, its hard to believe that the spec Vcc is more than 1.4 volts. They have to allow a little room for the overclockers. Although the chips max rating is 45 amps, 40A appears to be the max for any Hammer chips they know about. I would guess code 0=0.8v 32 steps of 0.025v would give a max voltage of 0.8+31*.025= 1.575 volts. Petz

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next