Dream Machine ( Build your own PC ) Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Dream Machine ( Build your own PC )

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Haim R. Branisteanu who wrote (14395)	12/23/2003 12:31:22 PM
From: Bruce A. Thompson	Read Replies (1) of 14778

Haim Sorry for the delay. The CPU jumper settings are actually to enable either 200 FSB only or a choice. Set the jumper for the choice. Your AMD 2700 needs the 166 FSB option if it is not overclocked. If you really want to see it scream, set the BIOS FSB to 200> The memory settings to agressive>bump the CPU core voltage and Memory voltage up one notch each>set the multiplier to 11. WATCH YOUR CPU TEMP CLOSELY! DO NOT ALLOW IT TO EXCEED 55 deg C. If it does, either get a SLK 900 heat sink or go back to the stock settings. BT

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next