SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Computer Learning
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Magnatizer who wrote (40616)4/13/2004 12:07:45 PM
From: Esteban  Read Replies (1) of 110652
 
Mag,

Generally mobos have 2 ide connectors. Many feel it's best not to mix cdroms with hard drives on the same ide channel. So if you have only one hard drive, it should be set as primary master on the first IDE channel. The cd rom should be jumpered as master and hooked to the mobo with a different cable to the secondary IDE channel.

If the cd rom must be a slave for some reason, set the jumper to slave and hook it to the same cable as an existing master device. Be sure to connect it to the middle connection on the cable, not the end one which is for the master device.

Esteban
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2026 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News