SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Dream Machine ( Build your own PC )

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: shadowman who wrote (14587)5/18/2004 12:50:34 PM
From: g_m10  Read Replies (1) of 14778
 
Just done tweak test. Everything seems OK as far as I can see. I will ask Bell to chack their settings again.

1. Your Tweakable Settings:
Receive Window (RWIN): 17280
Window Scaling: off
Path MTU Discovery: ON
RFC1323 Window Scaling: OFF
RFC1323 Time Stamping: OFF
Selective Acks: ON
MSS requested: 1440
TTL: unknown
TTL remaining: 111

2. Test 146000 byte download
Actual data bytes sent: 146000
Actual data packets: 102
Max packet sent (MTU): 1480
Max packet recd (MTU): 1480
Retransmitted data packets: 0
sacks you sent: 0
pushed data pkts: 15
data transmit time: 1.178 secs
our max idletime: 300.0 ms
transfer rate: 75990 bytes/sec
transfer rate: 607 kbits/sec
This is not a speed test!
transfer efficiency: 100%


3. ICMP (ping) check
Target unpingable
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext