BC: NEW ENERGY TECHNOLOGY
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
Miracle in the Void: The New Energy Revolution
Dr. Brian O'Leary, Hawaii and Stephen Kaplan, Portland, Oregon
"Ere many generations pass, our machinery will be driven by power obtainable at any point in the universe. . .it is a mere question of time when men will succeed in attaching their machinery to the very wheelwork of nature." - Nikola Tesla
Imagine a world with abundant, compact, inexpensive, clean energy. Global warming has been reversed. The air is clean. Power and gas stations have been put to other uses, and the unsightly grid system has been dismantled and recycled. An unusual type of energy makes all this possible. It does not come from the sun, wind, rain or tides, nor is it a fossil or nuclear fuel taken from the ground or chemically synthesized. In some cases the source appears to be everywhere in space-time, invisible and infinite. In others, nuclear transmutations seem to be miraculously taking place at room temperature accompanying the release of energy.
Incredible as this scenario appears, we shall see in this article that laboratories around the world are repeatedly tapping into this abundant energy. Some leading theoretical physicists are beginning to understand why and how this is possible. Several companies are in the beginning stages of bringing workable devices to market that clearly produce more energy than what is needed to run them (so-called overunity devices)..
Research Breakthroughs and Commercial Developments According to knowledgeable observers, we should focus our attention on six new technologies:
(1) plasma-type devices
(2) solid-state electromagnetic devices
(3) hydrogen gas cells
(4) super motors based on super magnets
(5) cold fusion or "new hydrogen energy"
(6) hydrosonic or cavitation devices
(1) Plasma-type devices - A variety of plasma-type devices have been patented and are being developed with private funding for applications ranging from computer chips to power plants. One of the most promising of these devices is called the XS NRG PAGD (Pulsed Abnormal Glow Discharge) reactor. Created by inventors Dr. Paulo and Alexandra Correa at Labofex in Canada, the system is well on its way to commercialization for electric power generation in vehicles and in homes, solidly protected by U.S and foreign patents (U.S. Patent 5,449,989).1
The reactor's self-oscillating electrical plasma discharge produces electrical energy directly, with no intermediate thermal conversion step. The electricity produced by the Correas' device is effectively free. The Correas write conservatively: " . . .The cost of kWh (kilowatt hours) produced by this technology is estimated to be more than ten times cheaper than what is presently available from any other energy source."
Ken Shoulders' "charge cluster" device is another promising plasma technology. Shoulders worked for a number of years as a researcher for MIT, Stanford Research Institute and private corporations. In the 1960s he helped to develop much of today's microcircuit technology. His high-density charge cluster device produces more than thirty times greater output than input energy.2
Produced by a short pulse of electric potential, a typical one-micron charge cluster is a tightly packed group of about 100 billion electrons which have broken free from their nuclei and have come together into remarkably stable ring-shaped units that look like tiny donuts. At first glance, they seem to violate a principle of physics that asserts that electrical charges, either positive or negative, repel each other. Shoulders' 1991 patent for "energy conversion using high charge density" was the first successful patent to claim significantly more output than input in a device that could be a practical source of decentralized electrical energy (U.S. Patent 5,018,180). Because charge cluster technology works without the need for magnetic fields or low temperatures, it could well be one of the first new energy devices to be commercialized.
Shoulders' basic process may also be valuable for the remediation of nuclear waste. By bombarding radioactive nuclei with charge clusters, the induced nuclear reactions (primarily fissioning of the heavier elements) result in a reduction of harmful radiation. Laboratory experiments show a dramatic transmutation of radioactive thorium into smaller-mass elements with the marked reduction of the naturally radioactive thorium. With proper engineering complete eradication may become possible.
(2) Solid-state devices - A pioneering solid-state technology is Wingate Lambertson's World into Neutrinos (WIN) process. Dr. Lambertson has conducted materials research and development for such organizations as U.S. Steel, the Universities of Toledo and Rutgers, Argonne National Laboratory, the Carborundum Company and Spindletop. He has been doing independent research over the past two decades on a a solid state device which he believes can provide a practical source of power through the harnessing of zero-point energy.3
Lamberton's "electron dam" (E-dam) is made out of Cermet, a highly advanced heat-resistant ceramic and metal composite. An accelerated electrical charge sends a stream of electrons into the E-dam, and the electrons become stored much like a conventional dam stores water. When the electrons are released, they gain energy from the zero-point energy present in the E-dam. After they flow into the unit to be powered, they move into another E-dam for recycling.
Lambertson changed his cermet chemistry and E-dam design when he learned that an unexpected chemical reaction was taking place. A different combination of materials and composite design appears to stabilize the process, and a yield of 145 percent was achieved in tests conducted in 1998. Since that time an induction effect has become a major problem which severely inhibits charge acceleration and yield. The present direction of his research is towards reducing induction in his E-dam using two different complementary approaches. It appears that these approaches will solve his remaining major problem. His highest yield using these approaches in June 1999 was 109 percent. Lambertson is confident that he will achieve higher yields with further experimentation, probably as high as 200 per cent, the level needed for commercial viability. He is currently exploring future production with interested manufacturers. Lambertson has a strong interest in providing new solutions for the energy needs of developing nations.
Highly regarded Canadian inventor John Hutchinson has developed a solid state "crystal energy converter" made out of very common materials which is an electrical power source he claims behaves like a battery and never runs down. This small, self-running power source, which typically puts out DC power amounting to one or two volts, has produced up to six watts of power, and he believes it could be engineered to replace batteries and other power needs.4
(3) Hydrogen gas cell - Dr. Randell Mills of BlackLight Power, Inc. has come up with a simple device he believes turns hydrogen into a clean and limitless source of power. In his lab, Mills puts in a small amount of hydrogen gas into a vacuum-sealed, three-quart stainless steel "can", adds a few tablespoons of a common chemical compound, turns up the heat to about 250 degrees centigrade and seemingly creates ten to twenty times more energy than he put into the process. 5
According to Mills, the secret to BlackLight Power comes from shrinking or collapsing the size of the hydrogen atom from its natural "ground" state to a lower energy state. As the hydrogen nucleus collapses, the electron gives off heat energy, and the smaller the nucleus gets, the more heat the electron gives off. Once started, the reaction can sustain itself, as the hydrogen atoms collapse smaller and smaller, releasing increasing amounts of energy with each collapsing "transition". Of course, we do not yet know whether Mills' theory or some other will eventually be accepted by science as the explanation for this process. The important point is that the experimental results show that it works.
An impressive feature of the BlackLight Power gas cell is its simplicity. If successful, the process is also attractive because it is safe, lacks harmful byproducts or emissions, and does not require the use of exotic or scarce materials. The only "waste" products are collapsed hydrogen atoms, or what Mills calls "hydrinos", which have characteristics similar to helium, being inert and lighter than air.
Because hydrogen is the most abundant element both on Earth and throughout the universe, the abundance of energy available through this process is difficult even to imagine. For example, a cup of water contains enough hydrogen to produce over 3,000 kilowatt-hours of heat if you "collapse" the hydrogen atoms to one-twentieth of their normal size, or enough to provide all the energy needed for an average home - space and water heating plus electricity - for a month.
PacifiCorp, an Oregon-based utility holding firm, has demonstrated its belief in Mills' work by investing more than one million dollars in the company, and other corporations appear likely to follow their lead. With this kind of support, Mills is confident his company will soon complete a BlackLight Power cell that will produce a full kilowatt of heat. Once this is accomplished, it can quickly to bring to market a commercially viable energy cell.
(4) Magnetic Motors - Based on physicist Michael Faraday's observation in the 1830s that anomalous electricity can come off a rotating disk containing magnets, a number of inventors have created motors that they believe have produced over-unity power in public demonstrations. One of us (O'Leary) watched several such demonstrations, as reported in the book Miracle in the Void. According to their inventors, some of these new devices produce four to six times as much mechanical energy as input electrical energy. In other words, once a machine achieves a certain threshold of revolutions per minute, it supposedly can be unplugged and serve as a free-running generator of electricity.
(5) Cold fusion - On March 23, 1989 Drs. Martin Fleischmann and Stanley Pons at the University of Utah startled the world with their claim that they were getting excess thermal energy far beyond electrical input energy from an electrochemical cell with a palladium cathode and a heavy water electrolyte. The cell output, they said, was substantially more than could be explained by any chemical reactions. 6
Considerable controversy has surrounded cold fusion ever since the first experiments. In 1989, a Department of Energy research panel, dominated by hot fusion advocates, proclaimed that no government funding should be invested in such a questionable area of research. Since then, following the lead of the scientific establishment, the media has generally either criticized or ignored cold fusion researchers.
However, the evidence for the validity of cold fusion is growing stronger and stronger daily. The peer-reviewed published literature provides overwhelming support for both the nuclear-scale excess heat and nuclear changes in what were supposed to be exclusively chemically active systems. There have been reports of transmutations of heavy elements in various cold fusion experiments - both in ordinary water and in heavy water systems - potassium changed to calcium, rubidium to strontium, and palladium to silver, rhodium, ruthenium, etc.
The Pons-Fleischmann process has been declared valid by Dr. Georges Lonchampt, one of the top members of the French Atomic Energy Agency. Researchers at Los Alamos National Laboratory and the U.S. Navy's China Lake research lab have conducted successful cold fusion experiments. Finally, the U.S. Army has reviewed the pioneering cold fusion research of Dr. John Dash, a metallurgist from Portland State University in Oregon, and decided to fund his work for three years.
Stanley Pons and Martin Fleischmann, despite overwhelming criticism heaped on them by US scientists and scoffing by American media, continued their work in France and England. With funding from a Toyota Foundation, they claim to have made excellent strides in the development of the heavy-water, palladium cathode, electrochemical cells. Currently, months of continuous testing of cells operating at boiling temperature has produced data showing thermal output of twice the input electrical power - all from a tiny palladium cathode.
Clean Energy Technologies (CETI) is marketing licenses for the a power cell invented by Dr. James Patterson, a scientist with a distinguished record of achievement. News of his device spread widely when it was discussed on two ABC shows, Nightline and Good Morning America.
The Power Cell has produced kilowatt levels of thermal energy at more than twenty times the input electrical energy. It has been independently tested and replicated by several universities, utilities and corporate research laboratories. Motorola has tested a number of cells and found that with at least one cell they were able to turn the input electrolysis power off, walk away, and have the output power of twenty watts (thermal) continue for at least a half a day. On June 11, 1997, CETI announced on Good Morning America that a prototype hot water heater is scheduled to be mass-produced within two to four years.
Perhaps the most astonishing finding from cold fusion research is the apparent observation of radioactivity reduction in the process! CETI, one of the first cold fusion companies, recently announced it had been awarded a US patent on an electrolytic process for reducing the radioactivity of thorium and uranium. The company claims its process can reduce the radioactivity of radioactive materials by over 90 per cent in periods less than 24 hours - compressing into hours what nature takes billions of years to do. A demonstration of this seemingly successful process was included in the same Good Morning America story which described Patterson's prototype water heater.
Dr. Norm Olson, a Department of Energy researcher based at its Hanford nuclear facility, was interviewed by ABC and indicated an interest in exploring Patterson's process. He later tested the CETI power cell and found that it did indeed reduce the radioactivity of uranium and thorium. He cautions, however, that much more basic research needs to be done before this or any other process can be developed into a workable technology for dealing with nuclear waste.
There are at least three other groups who also claim to be able to reduce radioactivity by other methods, which have yet to be awarded patents. One of them, the Cincinnati Group, is marketing to scientists a kit which demonstrates their transmutation process. If purchasers follow their suggested protocol and do not get the claimed results, their money will be refunded.
(6) Hydrosonic or cavitation devices - James Griggs' Hydrosonic Pump is already being sold to customers, regularly providing them with over-unity energy. An energy efficiency consultant from Georgia, Griggs invented the pump as a result of his curiosity about a common phenomenon called water hammer or cavitation. Griggs noticed that heat emanated from fluids, which flow quickly through the pipes of a boiler causing water pressure to drop in part of the pipe. Bubbles formed in the low-pressure areas collapse when carried to areas of higher pressure. The resulting shock waves collide inside the pipe bringing about the water hammer effect. |
