SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Strategies & Market Trends : Ask Vendit Off-Topic Questions
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Walkingshadow who wrote (7032)3/26/2005 3:56:55 PM
From: Gersh Avery  Read Replies (1) of 8752
 
Nope, sorry ..

The angle is established by the intersection of two lines.

First line from points 2 and 3, which will be the starting points for the upper and lower tine of the fork.

The exact center of that line is the point that the center tine crosses the last line you drew.

Draw a line from the center tine starting point, through the center of the line between points 2+3 and extend past.

The upper and lower tine have the same slope as the center tine does.

Not 90 degrees at all ..

Sorry that I didn't get it across before.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News