SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Real(?)/ claimed MPG

 Public ReplyPrvt ReplyMark as Last ReadFileNext 10PreviousNext  
From: long-gone8/30/2005 2:01:13 AM
  Read Replies (1) of 20
 
100mpg"about"
M1030M1 Diesel Combat Motorcycle

This is no wimpy bike with a converted diesel generator for an engine. This is a high performance enduro bike that will run over 100 mph, revs to 7000 rpm and will climb the proverbial "brick wall"



The engine was designed in part by Dr.Stuart McGuigan of the Royal Military College of Science at Cranfield, UK and has been further developed to it's current performance level by HDT and F1 Engineering

The feasability study and the first concept model was based on the Kawasaki KLR 650 gasoline motorcycle engine, however the production diesel engine is built from the ground up by HDT and F1 Engineering

The engine configuration is a liquid cooled, normally aspirated, 584cc (36 cu in) double overhead cam single with four valves per cylinder. Diesel fuel supply is through a special Fuel Injection unit and single injector developed for the engine by Advanced Diesel Injection of San Diego. It currently develops 34 bhp at 5500 rpm and produces power between 1500 and 7000 rpm

The engine has multi-fuel compatibility and can use;

a) Commercial Diesel Fuels, including low sulfer fuels, such as CARB Diesel
b) NATO Military Spec Diesel Fuel
c) Bio-Diesel
d) Aviation Kerosene including JP4, JP5, JP8, and AVTR
e) Kerosene

Kawasaki Motors supplies the KLR 650 rolling chassis which is then modified to accept the HDT diesel engine.

Front suspension is stock KLR 650 with the exception of different rate springs selected for the new application. Rear suspension is a multi link system controlled by a special, single, coil over shock absorber developed by F1 Engineering specifically for this bike (see F1-HDT Suspension). The shock is a single rebound adjustable, nitrogen filled rebuildable unit manufactured from lightweight, non-corrosive, aerospace materials. Although it is infinitely adjustable by interior valving the shock was kept to a simple adjuster in order to maintain the specific characteristics developed for the bikes use.


In the U.K., a team of three riders, Stuart McGuigan and John Crocker from RMCS Cranfield and Fred Hayes of HDT, entered the 2003 'National Rally', an annual motorcycling competition for road riders. Competing for the rally's premier platinum award involves riding 540 miles in 20 hours, checking in at as many 'controls' as possible without exceeding the stipulated mileage.

The diesel bikes performed flawlessly and achieved about 100 mpg over the 540 miles, cruising at the maximum speed that conditions and the law allow on country roads, through congested towns and on freeways. The team scored a perfect platinum award.
Civilian Version Coming Soon
Testing and Development is underway on a civilian version of the diesel motorcycle. It is hoped that this machine will be available to the public in 2005. Check back on this web sit for future developments and information.
mocca.kaf.fi
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFileNext 10PreviousNext