SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Strategies & Market Trends : Mish's Global Economic Trend Analysis
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: benwood who wrote (53021)7/4/2006 12:29:10 AM
From: Jim McMannis  Read Replies (2) of 116555
 
You just get a 1/2" sheet of corian or wilsonart and glue on a couple strips under the front edge. Then run the router bit on the top, then the bottom and smooth it off with sandpaper. You end up with a 1 1/2" round bullnose. The rest of the top should be supported with 3/4" or better plywood.
It sure ain't rocket science. Hardest part is finding a raw sheet of Corian. Dupont likes to sell only to shops. Others will sell direct though, like Wilsonart etc.

When you saw corian you will soon realize it's basically plexiglass (acrylic with plasticizers) because of the smell.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2026 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News