SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Strategies & Market Trends : The Home Run

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Patrick Slevin who wrote (435)10/24/2006 11:18:15 AM
From: Nemer  Read Replies (3) of 525
 
>>>>>Gee, If I could do this every October I could take the rest of the year off.

take off from WHAT

>>>>>What club heads did you buy to make these?


tried multiple (unknown to rich folks like you off brands) and am fairly well pleased with these two .... as I currently have three full sets of irons ==== one standard half inch Dynamic Gold shafts between iron lengths for the Hypers and one length *(37inch for all) Dynamic Gold shafts of Hypers AND one standard half inch between iron numbers with Penly Stealth graphites on the V series

monarkgolf.com
monarkgolf.com

I prefer the looks and the unaltered feel of the V series BUT have found the HyperSonics much easier to adjust/weight/etc

been telling you beans are easy for more than five years now ...
hey ...lumber is close to a five year low now ... I just bought a couple of thousand board feet (not contracts, the actual boards) of 5/4 s4s r4c yellow pine to do a bit of construction projects this winter for a tad over $220 per thousand.

I guess I better tell you, seeing as how you rich folks only hire things done and are pretty non savvy about working class nomenclature ....
5/4 is inch and quarter thick
s4s is surfaced (smooth) 4 sides
r4c is radiused (rounded and smooth) 4 corners

beans are easier than spooos
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext