YellowLegalPad Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Strategies & Market Trends : YellowLegalPad

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

From: John McCarthy	10/29/2006 6:15:02 PM
	of 1182

TWD - from NumbersGuy Just another hugely important piece of information: The database of drillholes that were used to come up with this calculation cover a total distance of 3225 metres. - The indicated numbers used a total strike length of 1900 Metres and is based on using drill density of 40 Metres x 40 Metres. Now, appx 90% of the indicated takes place over the first 828 Metres starting East going West with depths between the 30 Metre mark and the 300 Metre mark with significant high grade material between 30 and 200, open pitable. Factor in that there is a major gap between 828 Metres and 1228 along the near surface where only 3 holes were drilled. (Company will have an updated longitudinal that includes those three holes today). This means the company will go back do an in-fill drill and proof up considerable more oz's in that gap. Then you have the fact that the near surface is open to the west from the 1228 Metre, how much will be found and how far it goes will be determined when they go and drill it off, But you have to love there chances. - The inferred numbers are based on using a strike length of 3225 Metres using drill denities of 80 Metres X 80 Metres. Again if you look at the longitudinal section you will notice that there are huge gaps between drill holes. Approx only 30% of these hole meet that 80 X 80 specification to meet the inferred standared. What this means is that if Trade Winds goes back and infill drills these areas, they will significantley increase their oz's. The method Golder used is a weighted system (as Oxinos pointed out). There will be more clarity on these issues when the full report is published in the near future. I know people are having a hard time with this as these reports are technical but this is the truth about this calculation. The guys at Trade Winds are at the office right now to field any questions Toll Free (877) 811-4518 ext 228. Again these are the facts and logic should be that the analysys, funds, and bigger players if they don't already now this will find out. To those who say there is a lot of paper out. Well there is only 60 million outstanding, funds own a chunk and know they have a huge resource and indicated calculation that is simply going to grow by putting holes in the ground. If there is paper out there then the bigger players love that because now they can now accumulate a position. It's not just about Trade Winds, it's about the shear size of the entire Detour camp in terms of oz's in the ground. There is big time awareness right now with this area. PS: I understand that Trade Winds has another resource calculation to follow on the North Walter Lake Zone (NWL ) over the next 2 months. The zone below the MZone (the Main Zone) which is the same trend as the old Placer Dome mine and the one that PLG has there 3.5 Million oz calculation on hasn't even been drilled yet. GoWest, well that will blow this thing wide open if the structure doubles back on itself and they hit high grade. Also Trade Winds is getting zero for all there other properties and you will be hearing more about them in the near future. This one's a no-brainer guy's (and girls). stockhouse.ca

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next