SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : Novellus
NVLS 2.400+2.1%Jul 24 5:00 PM EST
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: etchmeister who wrote (3709)7/10/2008 11:51:22 AM
From: gugie   of 3813
 
"In the DRAM industry, traditional ArF dry lithography equipment is still the mainstream fabrication tool, with its physical limit being identified at 65nm. This implies that for any design geometry that is smaller than 65nm, shift to immersion tool is necessary"

Really? How many immersion tools does Intel use at 45nm?

Is there some difference in the way logic measures nodes vs memory makers?
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News