SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Strategies & Market Trends : Ride the Tiger with CD

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Proud Deplorable who wrote (142507)1/19/2009 1:11:55 PM
From: Rocket Red  Read Replies (1) of 313069
 
Snowdogy11/19/2009 1:06:54 PM | | 14 reads | Post #25754051 Rate thisclarity
0 clarity : 0
Rate this:


overall quality
0 overall quality : 0
Average quality rating by the Stockhouse community.
credibility
0 credibility : 0
Rate this:


usefulness
0 usefulness : 0
Rate this:


I spoke to Richard Macey just now as well. He is swamped in calls. He can't (obviously) tell me anything that isn't already released by CDB and in the public domain but as Rocket said a NR is being worked on at the moment. He wants to do things properly which means get proper documentation and an interpretation of the drill hole and then once he can describe it and produce a map he will do so but only after he is confident of the information because he will be held to it. In his words, he won't release any information on the hole until the information is confirmed because he doesn't want to be "shut down" by securities regulators. He refused (quite properly) to confirm the 480 but also wouldn't categorically deny it. His answers were very proper considering the flurry of interest in CDB since information concerning the 480 was brought to light over the weekend.

The source of the 480 hole info is on the V. GM web site.

So, we are left with the V.GM map showing the 480 on CDB lands and CDB working on an official response.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext