AXVC - Axial Vector Engine Corporation Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Technology Stocks : AXVC - Axial Vector Engine Corporation

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

From: QualityStocks	8/27/2009 2:06:32 PM
	of 133

Axial Vector Energy Corp. (AXVC.PK) Linear Power Transmission in Engines Axial Vector Energy Corp. is a global company that owns, develops, licenses and invests in revolutionary technologies. These technologies provide a better way of doing things, an improvement on current technology. One such example is Axial Vector’s work on the internal combustion engine and linear power transmission. Linear drive has unique properties in comparison to a conventional engine. In a linear drive there are two opposing pistons in every cylinder. The pistons in their cylinders are uniformly distributed around the circumference of the drive shaft and move back and forth in a smooth liner motion, parallel drive shaft. This is the axial transfer of energy from the pistons and is a balanced configuration. In a standard drive there is only one piston per cylinder. The cylinders are located on one side and are perpendicular to the drive shaft. This results in an unbalanced engine. This condition is experienced as vibration or rocking when a car is started. The energy from the up and down motion of the pistons is transferred to the crank shaped drive shaft through linear rotational motion, to a bearing, and then it simply cranks the drive shaft. It is the rotational aspect of the piston movement in the standard drive, which causes engine wear, and a relatively short operational life when it is compared to linear drive or “Axial Vector Engines.” Therefore, it can be seen that linear power transmission is ideally suited for high-pressure applications such as internal combustion engines since inherent characteristics of the reciprocating pistons move in perfect balance along the drive shaft, creating a simple harmonic balance. These “Axial Vector Engines” have fewer parts and are much lighter than conventional engines. They are also capable of doing more work than a conventional engine of the same horsepower. The original linear power transmission design concept was conceived during World War II by Dr. Karl Herrmann and was used by the US Navy for their torpedoes. In 2004, Axial Vector acquired the rights to Dr. Herrmann’s intellectual properties and all engine prototypes. The company is using this “old” technology as a base from which they are designing “green” engines for today’s world. Please see disclaimer on our profile

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next